The iQ12, a high-powered 2-way loudspeaker from Turbosound, is ideally suited for a wide variety of applications in portable and fixed installation, music and speech sound reinforcement environments. Its driver complement includes a 12" low frequency (LF) driver with a low-mass voice coil, bringing forth enhanced transient response, as well as a high-temperature 1" compression driver with a copperclad aluminium voice coil, providing extended high frequency (HF) reproduction.

It comes equipped with a very efficient and lightweight 2-channel KLARK TEKNIK Class-D power amplifier, and delivers an impressive 2,500 Watts of output power. It features a high degree of control over the loudspeaker system's performance, managed by a sophisticated, yet easy-to-use KLARK TEKNIK Digital Signal Processor (DSP), providing dynamic EQ for remarkable full-range response at low volume levels, along with transparent limiting for utmost clarity at high-output levels – plus long-term reliability. The unit's advanced DSP speaker modelling presets include accurate and detailed models of some of the audio industry's most-respected and renowned loudspeakers.

Additionally, KLARK TEKNIK has also developed a highly versatile Spatial Contour Control (SCC) DSP function, enabling the user to easily optimize its frequency response, tailoring it for physical placement of the speaker. It includes frequency compensation for stand-, floor-, wall- or ceiling-placement, much like the adjustments commonly found on studio reference monitors.

Turbosound iQ12 Applications:

Portable and fixed installation • Music and speech • Sound reinforcement applications

Turbosound iQ12 Features:

  • 2-way full-range loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring Klark Teknik Class-D technology
  • KLARK TEKNIK DSP for total system control, including SCC, which compensates frequency response in relation to physical speaker placement
  • Speaker modelling includes accurate models of industry standard speakers
  • ULTRANET digital audio networking connects to mixers and other sources
  • 12" LF driver with low mass voice coil for improved transient response
  • High-temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
  • Fully-featured user interface with LCD display for ease of navigation
  • Lightweight fiberglass-reinforced composite enclosure
  • Rugged powder coated perforated steel-mesh grille
  • Dual-angle pole-mount provides for accurate audience coverage
  • Multiple internal rigging points for installation applications
  • Mains input and link output on Neutrik powerCON® connectors
  • 10-Year Warranty Program (contact your Sales Pro for further details)
  • Designed and engineered in the U.K.

Turbosound iQ12 Specifications:

  • Frequency Response: 52 Hz – 18 kHz ±3 dB; 45 Hz– 20 kHz, -10 dB
  • Nominal Dispersion: 80° H x 60° V @ -6 dBpoints
  • Maximum SPL: 125 dB peak
  • Crossover type: Active
  • Transducers: 1 x 12" (308.5 mm) LF driver; 1 x1" (25.4 mm) HF compression driver
  • Limiter: Independent HF, LF, peak and rms
  • Maximum output power: 2,500 W
  • Type: Class 'D'
  • Protection: Short circuit, open circuit, thermal
  • Input A / B: 2x combo jack/XLR
  • Sensitivity: Line +4 dBu, mic -22 dBu, switchable
  • Input impedance: 20 kΩ unbalanced, 40 kΩ balanced
  • Maximum input level: +21 dBu
  • Output A / B: 2 x XLR Linked to input
  • Mix output: XLR, balanced
  • Output impedance: 100 Ω unbalanced, 200 Ω balanced
  • Ultranet input/link: 2x RJ45
  • Mains Supply: Neutrik powerCON input 20 A and link 15 A
  • DSP: Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER
  • Mixer section: 2x gain controls (channels A and B); 2 x Line/Mic switch
  • Factory EQ presets: Positioning, Sound mode, Sound modeling, FBQ
  • Display: LCD 128 x 32, blue backlit
  • Delay: 0 - 300 ms
  • Equalization: High and low shelving EQ, 2x parametric EQ
  • Limiter: Zero attack input limiter
  • Presets: 20 total presets, 19 user-definable
  • Crossover: High Pass L-R 24 dB/oct
  • Protection: Lock-out function for all settings
  • A/D conversion: 24-bit,44.1/48 kHz sample rate
  • Converter type: 24-bit, delta-sigma
  • System Signal: 16 channels
  • Latency: < 0.9 ms
  • Frequency response: 20 Hz to 20 kHz (+0 / -3 dB)
  • Dynamic range: Typical 92 dB
  • Cables: Shielded CAT5
  • Cable length: max. 246ft (75m) recommended
  • Power consumption: 150 W @ 1/8 max power
  • Voltage (fuses):
    • USA / Canada: 120 V~, 60 Hz (T 15 A H 250 V)
    • UK / Australia / Europe: 220-240 V~, 50/60 Hz (T 10 A H 250 V)
    • Korea / China: 220-240 V~, 50/60 Hz (T 10 A H 250 V)
    • Japan: 100 V~, 50/60 Hz (T 15 A H 250 V)
  • Dimensions (H x W x D): 24.0" x 14.5" x 14.5" (609 x 370 x 370mm)
  • Net weight: 46 lbs. (21.1 kg)
  • Construction: Injection-moulded polypropylene enclosure
  • Finish: Black painted
  • Grille: Powder coated perforated steel

Turbosound iQ12 12" 2500 W 2-Way Active Speaker

SKU: Turbosound iQ12
$889.00Price
    • Grey Facebook Icon
    • Grey Twitter Icon
    • Grey Instagram Icon

    Be the First to Know About Deals and Special Offers

    How can we help?

    GREY WILLOW MUSIC

    800 726 7193

    GREY WILLOW MUSIC is located on the Standing Rock Sioux Nation 

    MAILING:

    PO BOX 926

    FORT YATES, ND 58538

    All prices, descriptions and specifications subject to change without notice. Not responsible for pricing errors.

    ©2014 GREYWILLOWMUSIC/GREYWOLLOWLLC